WPI PZMIV Manuel d'utilisateur télécharger pdf (Page 13)

MICROSCOPES, CAMERAS

156

The AirTherm™ SMT is a new generation of heat control system from

WPI designed to be used in Live Cell Imaging applications with micro-

scopes ﬁtted with a full microscope environmental chamber enclosure.

The standard AirTherm™ SMT controls temperature and, as an option,

humidity.

The AirTherm™ SMT uses a PID control algorithm to maintain tightly

controlled loops of heat and humidity environment control.

With AirTherm™ SMT, the temperature of the sample and microscope

optics can be controlled to within 0.2°C. During operation, air is drawn out

of the chamber through a ﬂexible hose, heated by the AirTherm™ SMT

heater and re-circulated to the chamber by the return hose.

● Precision heat controller for use in live cell imaging and custom

incubators

● Control heat and humidity (optional) with a single controller

● Electrically and acoustically quiet

● Quick, precise response to thermal change

The system is typically used in a closed loop conﬁguration.

The AirTherm™ SMT system includes:

● Two coil-reinforced heater hose pieces and hose clamps.

● Temperature sensor for remote placement in environmental chamber

Humidity probe for monitoring chamber humidity available as an option.

Precision Heat Control

Smart, electrically quiet air heater for live cell

imaging systems and custom incubators

AIRTHERM SPECIFICATIONS

AIR FLOW RATE 20–50 CFM (0.55–1.4 m

/minute)

CONTROL TEMPERATURE RANGE Ambient to 60°C

TEMPERATURE RESOLUTION 0.1°C

TEMPERATURE ACCURACY 0.2°C

HUMIDITY CONTROL RANGE Ambient–90%

HUMIDITY RESOLUTION 0.1%

HUMIDITY ACCURACY 5%

HUMIDITY REPEATABILITY 0.5%

ANALOG OUTPUT 0.5°C resolution;

FOR CHART RE-CORDER 0–10V represents 0–100°C

HEATING VOLUME Less than 50 CF (1400L), re-circulating

TEMPERATURE SENSOR TYPE Platinum RTD 1000 W

HUMIDIFIER TYPE Ultrasonic

HUMIDIFIER TANK CAPACITY 0.5 gallons

HUMIDIFIER DAILY OUTPUT 2 gallons

FUSE For 120 VAC, 8A 250 V 5x20 mm metric

For 230 VAC, 4A 250 V 5x20 mm metric

POWER 450 W, 95–135 V or 220–240 V, 50/60 Hz

DIMENSIONS 6½ x 8 x 7½ in. (15.5 x 21 x 19 cm)

Microscope

Chamber

(not included)

Air-Therm SMT

A typical AirTherm™ SMT installation

places the heated air inﬂow at the

bottom and the cold air return at the

top of the microscope chamber.

World Precision Instruments www.wpiinc.com

UK: Tel: +44 (0)1462 424700 • [email protected] Germany: Tel: +49 (0)30-6188845 • [email protected]

US: Tel: 941-371-1003 • sales@wpiinc.com

AIRTHERM-SMT-1W Airtherm™ SMT Heater, 110V

AIRTHERM-SMT-2W Airtherm™ SMT Heater, 230V

OPTIONAL ACCESSORIES

15590 Replacement Hoses, 2.5” diam., 4.5 ft

300276 Replacement Platinum Temperature Probe

98727 Replacement Temperature Probe

98728 Humidity Probe

1 2 ... 8 9 10 11 12 13 14 15 16 17

Commentaires sur ces manuels

Pas de commentaire

WPI PZMIV Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Microscopes WPI PZMIV